The Horn Utility Table has been designed to be Multi-Purpose. It can be used as a cutting table plus it has our Horn 3 position maximum size lifter included. This means you can sit at a high stool (We are currently trying to source one) or you can stand and sew which is becoming more popular.
On one side of the table, it has the lifter area plus 2 small adjustable shelves to help give you more legroom on the left. The table has a base so your sewing machine pedal can sit on top the base.
On the other side of the table, you have adjustable shelves and drawers. They don’t have a lot of depth to them but can very handy for all types of tools etc.
When the lifter is in the storage position we have included a melamine board that fills in the cut-out area so the table can then be used as a cutting table. We can also supply at an extra cost, a clear Perspex insert that will fill in the cut-out area, you can then use it as a lightbox. The table has our new recessed cut-out which when used with a flatbed insert gives you a smooth surface.
The Table sits on 5 x 73mm metal castors to help give the table the strength required. The doors close over the front of the table and when opened they are used to support the extension pieces on the side of the table. The doors are on normal 50mm lockable castors. The doors also lock into the open and closed positions by using magnets.
PLEASE NOTE: The Fill in panel supplied to fill in the cut-out area when the machine is in the storage position the wood grain will not match. This is more noticeable on the Beech and Teak Colour.
***The Maxi lifter supplied on this cabinet has a high compression lifter to assist with the heavier sewing machines. It will need a fair bit of pressure to push down on the lifter if a lighter sewing machine is used in this cabinet.
Sewing machines and accessories not included.